OUR PRODUCTS
Straetmans High TAC GmbH is constantly producing, testing and developing new products for you.
OUR PRODUCTS
Straetmans High TAC GmbH is constantly producing, testing and developing new products for you.
flashproTAC
productline
flash rust inhibitors - flash rust inhibitors
flashproTAC
productline
flash rust inhibitors - flash rust inhibitors
Inhibitor preparation
flashproTAC C4E
Very effective rust film inhibitor with sodium nitrite. Effective even at low doses.
Flash rust protection for paints and varnishes
Based on nitrite
In-can corrosion protection
Inhibitor concentrate for iron and steel
organic inhibitor preparation
flashproTAC F2M
Effective flash rust inhibitor with positive properties for long-term protection. This inhibitor preparation is nitrite-free and contains no secondary amines. A higher dosage has more positive effects than products containing nitrite.
Flash rust protection for paints and varnishes
In-can corrosion protection
Temporary corrosion protection in cleaners
Inhibitor concentrate for iron and steel
Long-term effect in paints on iron and steel
Inhibitor preparation
flashproTAC C4E
Very effective rust film inhibitor with sodium nitrite. Effective even at low doses.
Flash rust protection for paints and varnishes
Based on nitrite
In-can corrosion protection
Inhibitor concentrate for iron and steel
organic inhibitor preparation
flashproTAC F2M
Effective flash rust inhibitor with positive properties for long-term protection. This inhibitor preparation is nitrite-free and contains no secondary amines. A higher dosage has more positive effects than products containing nitrite.
Flash rust protection for paints and varnishes
In-can corrosion protection
Temporary corrosion protection in cleaners
Inhibitor concentrate for iron and steel
Long-term effect in paints on iron and steel
TACorr
productline
Long-term inhibitors - long time inhibitors
TACorr
productline
Long-term inhibitors - long time inhibitors
Polyoxyalkenyl derivative
TACorrG50
Polymeric corrosion inhibitor with a multi-metal action spectrum. Depending on the application, acts as a wetting agent, EP/AW additive, co-emulsifier or adhesion promoter.
Not formulated ready for use for aqueous applications because it is not soluble in water. Alternatively, we offer TACorr G50-50 for this purpose.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Metalworking, e.g. oils, water-miscible or fully synthetic cooling lubricants
Metal pigments / flakes in pastes or applications of any kind, e.g. aluminum, zinc or other non-ferrous metals
Temporary corrosion protection in cleaners or rinsing solutions
Reinforces and supplements the effectiveness of other inhibitors such as anti-corrosion pigments
Polyoxyalkenyl derivative
TACorrG50-50
Based on TACorr G50 and is a mixture of polymer, TEA (triethanolamine) and water. TACorr G50-50 is already formulated to be perfectly emulsifiable.
For water-based paints & varnishes
Protects metal pigments / flakes of all kinds, e.g. aluminum, zinc or non-ferrous metals
Temporary corrosion protection in cleaners
Polyoxyalkenyl derivative / amide premix
TACorrG50 S
Mixture of TACorr G50 and fatty acid amide. This combination considerably improves the solubility in low-polar to non-polar systems and additionally increases the effectiveness.
For solvent-based paints & varnishes, also clear coats, UV varnishes
Metal pigments / flakes in pastes or applications of any kind, e.g. aluminum, zinc and non-ferrous metals
Temporary corrosion protection in cleaners or rinsing solutions
Reinforces and supplements the effectiveness of other inhibitors such as anti-corrosion pigments
Polyoxyalkenyl derivative / phosphate solution
TACorrG50 N
Neutralized mixture of TACorr G50 and phosphates. This results in two positive effects. Optimum multi-metal corrosion protection also for in-can, such as spray cans.
Water-based paints & varnishes
In-can corrosion protection
Temporary corrosion protection, e.g. in cleaners
Polyoxyalkenyl derivative / phosphate solution
TACorrMSM
Long-term corrosion inhibitor developed primarily for use in water-based paints and coatings. By modifying the TACorr G50 polymer, TACorr MSM improves, among other things, the infiltration results after the salt spray test on the scribe.
Long-term corrosion protection for water-based paints & varnishes
Steel and multi-metal protection
Aqueous EP systems
Improved adhesion
Reduces blistering and infiltration
Co-emulsifier
Polyoxyalkenyl / fatty acid amide solution
TACorrMSW
Modified version of TACorr MSM for use on critical substrates. Prevents corrosion effects on blasted, ground or similarly processed surfaces. Suitable for aluminium, galvanized steels and steel alloys.
Long-term corrosion protection for water-based paints & varnishes, such as water-based EP systems
Especially on blasted or sanded substrates
Improved adhesion
Reduces blistering and infiltration
Co-emulsifier
Organic inhibitor formulation
TACorrG50 Zi
Combination of long-term and flash rust protection. Improves adhesion on many substrates, even on vibranium. TACorr G50 Zi is water-free, but can be used universally in both aqueous and water-free systems.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Long-term and flash rust protection in one product
Improves adhesion and water resistance
Hydrolytically stable alternative to silanes
Supplementation or replacement of zinc phosphates
- Nitrite and VOC free
Polyoxyalkenyl derivative
TACorrG50
Polymeric corrosion inhibitor with a multi-metal action spectrum. Depending on the application, acts as a wetting agent, EP/AW additive, co-emulsifier or adhesion promoter.
Not formulated ready for use for aqueous applications because it is not soluble in water. Alternatively, we offer TACorr G50-50 for this purpose.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Metalworking, e.g. oils, water-miscible or fully synthetic cooling lubricants
Metal pigments / flakes in pastes or applications of any kind, e.g. aluminum, zinc or other non-ferrous metals
Temporary corrosion protection in cleaners or rinsing solutions
Reinforces and supplements the effectiveness of other inhibitors such as anti-corrosion pigments
Polyoxyalkenyl derivative
TACorrG50-50
Based on TACorr G50 and is a mixture of polymer, TEA (triethanolamine) and water. TACorr G50-50 is already formulated to be perfectly emulsifiable.
For water-based paints & varnishes
Protects metal pigments / flakes of all kinds, e.g. aluminum, zinc or non-ferrous metals
Temporary corrosion protection in cleaners
Polyoxyalkenyl derivative / amide premix
TACorrG50 S
Mixture of TACorr G50 and fatty acid amide. This combination considerably improves the solubility in low-polar to non-polar systems and additionally increases the effectiveness.
For solvent-based paints & varnishes, also clear coats, UV varnishes
Metal pigments / flakes in pastes or applications of any kind, e.g. aluminum, zinc and non-ferrous metals
Temporary corrosion protection in cleaners or rinsing solutions
Reinforces and supplements the effectiveness of other inhibitors such as anti-corrosion pigments
Polyoxyalkenyl derivative / phosphate solution
TACorrG50 N
Neutralized mixture of TACorr G50 and phosphates. This results in two positive effects. Optimum multi-metal corrosion protection also for in-can, such as spray cans.
Water-based paints & varnishes
In-can corrosion protection
Temporary corrosion protection, e.g. in cleaners
Polyoxyalkenyl derivative / phosphate solution
TACorrMSM
Long-term corrosion inhibitor developed primarily for use in water-based paints and coatings. By modifying the TACorr G50 polymer, TACorr MSM improves, among other things, the infiltration results after the salt spray test on the scribe.
Long-term corrosion protection for water-based paints & varnishes
Steel and multi-metal protection
Aqueous EP systems
Improved adhesion
Reduces blistering and infiltration
Co-emulsifier
Polyoxyalkenyl / fatty acid amide solution
TACorrMSW
Modified version of TACorr MSM for use on critical substrates. Prevents corrosion effects on blasted, ground or similarly processed surfaces. Suitable for aluminium, galvanized steels and steel alloys.
Long-term corrosion protection for water-based paints & varnishes, such as water-based EP systems
Especially on blasted or sanded substrates
Improved adhesion
Reduces blistering and infiltration
Co-emulsifier
Organic inhibitor formulation
TACorrG50 Zi
Combination of long-term and flash rust protection. Improves adhesion on many substrates, even on vibranium. TACorr G50 Zi is water-free, but can be used universally in both aqueous and water-free systems.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Long-term and flash rust protection in one product
Improves adhesion and water resistance
Hydrolytically stable alternative to silanes
Supplementation or replacement of zinc phosphates
- Nitrite and VOC free
TACorrSil
productline
Silane inhibitors - Silane based inhibitors
TACorrSil
productline
Silane inhibitors - Silane based inhibitors
Corrosion inhibitor based on silane
TACorrSilCX2
Ready-to-use corrosion inhibitor and adhesion promoter based on silane. Improves adhesion in all types of paint and coating applications. Suitable for both aqueous and anhydrous systems.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Improves adhesion to metallic substrates
For thin-film applications
No effect on the gloss
Effective in low dosage
Can be used directly without pre-neutralization
Corrosion inhibitor based on silane
TACorrSilCX2
Ready-to-use corrosion inhibitor and adhesion promoter based on silane. Improves adhesion in all types of paint and coating applications. Suitable for both aqueous and anhydrous systems.
For paints & varnishes for water-based or solvent-based, also clear coats, UV varnishes
Improves adhesion to metallic substrates
For thin-film applications
No effect on the gloss
Effective in low dosage
Can be used directly without pre-neutralization
TemProTAC
productline
Rinsing solutions - rinse solutions
TemProTAC
productline
Rinsing solutions - rinse solutions
Cleaners and rinsing solutions
TemProTAC
TemProTAC is a special inhibitor combination for direct application to metal surfaces. As an immersion or rinsing solution, cleaned or blasted metal surfaces can be protected against corrosion. The protective layer is so thin that it can be painted over directly.
Storage or transport protection without direct irrigation
Temporary corrosion protection
Without the formation of an oily film
Can be painted over directly
Immersion, rinsing or spray application possible
Cleaners and rinsing solutions
TemProTAC
TemProTAC is a special inhibitor combination for direct application to metal surfaces. As an immersion or rinsing solution, cleaned or blasted metal surfaces can be protected against corrosion. The protective layer is so thin that it can be painted over directly.
Storage or transport protection without direct irrigation
Temporary corrosion protection
Without the formation of an oily film
Can be painted over directly
Immersion, rinsing or spray application possible
Copper
productline
Non-ferrous metal inhibitors - non ferrous metal inhibitors
Copper
productline
Non-ferrous metal inhibitors - non ferrous metal inhibitors
Triazole derivative
Additive 78/2
Alternative to benzotriazole and effective even at very low doses on copper and non-ferrous metal alloys. We have registered this substance ourselves and it fulfills the same criteria as the BASF product Irgamet 39.
Metalworking
Industrial lubricating oils
Inhibitor for copper and copper alloys
No dust as with benzotriazole or drying possible
Thermal stability: stable up to 200°C
Self-emulsifying metal deactivator
TACorrE78
TACorrE78 is a water-soluble formulation based on our copper inhibitor Additive 78/2. It can be applied in low dilution directly as a rinsing solution on copper and copper alloys and does not have the negative properties of benzotriazole-based products.
Industrial copper production
Inhibitor solution for copper and copper alloys
Can be applied in low dosages
Triazole derivative
Additive 78/2
Alternative to benzotriazole and effective even at very low doses on copper and non-ferrous metal alloys. We have registered this substance ourselves and it fulfills the same criteria as the BASF product Irgamet 39.
Metalworking
Industrial lubricating oils
Inhibitor for copper and copper alloys
No dust as with benzotriazole or drying possible
Thermal stability: stable up to 200°C
Self-emulsifying metal deactivator
TACorrE78
TACorrE78 is a water-soluble formulation based on our copper inhibitor Additive 78/2. It can be applied in low dilution directly as a rinsing solution on copper and copper alloys and does not have the negative properties of benzotriazole-based products.
Industrial copper production
Inhibitor solution for copper and copper alloys
Can be applied in low dosages
Individual products
May we develop with you? We test for you in your products as a service.
Individual products
May we develop with you?
We test for you in your products as a service.
Our production partner
URSA CHEMIE GMBH Ursa has been providing us with advice and support in the production and manufacture of our products for over 20 years .We will be happy to put you in touch if you want to produce something.
Our production partner
URSA CHEMIE GMBH Ursa has been providing us with advice and support in the production and manufacture of our products for over 20 years .We will be happy to put you in touch if you want to produce something.